Vaporization PH regulator system
Thread Content
Most of the pulping additives currently in use are strongly alkaline substances, and these additives can themselves suffice for adjusting the pH value. Therefore, can the pH adjustment system be removed? I hope everyone can give some suggestions
Existence is rational; although most of the pulping additives currently in use are strongly alkaline substances, the pH adjustment system can play a role in verification and adjustment to a certain extent.
By gasification PH adjustment, you mean regulating the alkalinity of the water in the jacket, right? If this is removed, scaling will occur in the boiler water. However, the alkalinity cannot be too high either, as high levels can cause alkali embrittlement in the materials. Therefore, I believe that the PH adjustment system cannot be eliminated
The pH value adjustment system can be eliminated; currently, most manufacturers working on new projects have removed this system (ammonia addition).