Fire protection equipment prices

Attached fire protection facilities: 1. Accident prevention facilities ⑴ Detection and alarm facilities – Alarm devices for pressure, temperature, liquid level, flow rate, composition, etc.; detection and alarm devices for flammable gases, toxic and harmful gases, oxygen, etc.; as well as testing and inspection equipment and instruments used for safety checks and safety data analysis. ⑵Equipment safety protection facilities include guards, protective screens, load limiters, travel limiters, as well as devices for braking, speed control, lightning protection, moisture prevention, sun protection, freeze protection, corrosion prevention, and leak prevention. There are also safety locking mechanisms for transmission equipment, electrical overload protection devices, and static electricity grounding systems. ⑶Explosion-proof facilities: Explosion-proof devices for various electrical and instrumentation systems, mechanisms to prevent the intrusion of combustion-supporting substances (such as nitrogen sealing), systems to prevent the formation of flammable and explosive gases and dusts, as well as explosion-proof equipment and tools. ⑷Protection facilities in the workplace: facilities for radiation protection, anti-static measures, noise reduction, ventilation (dust and gas removal), protective barriers (nets), slip prevention, and burn protection, etc., in the workplace. ⑸Safety warning signs include various signs that indicate safety procedures, as well as signs for escape and shelter, as well as those indicating wind direction. ⒉Facilities for controlling accidents ⑹ Pressure relief and check valves: Devices such as valves, rupture disks, and vent pipes used for pressure relief, as well as valves used for preventing backflow, as well as sealing devices for vacuum systems. ⑺Emergency handling facilities: emergency backup power supplies, facilities for emergency shutdown, diversion, discharge (to flares), absorption, neutralization, cooling, etc., facilities for introducing or adding inert gases, reaction inhibitors, etc., as well as emergency shutdown and instrument interlock systems. ⒊Facilities for reducing and eliminating the effects of accidents ⑻ Facilities to prevent fire spread: flame arrestors, safety water seals, backflow preventers, oil (fire) barriers, explosion-proof walls and doors and other explosion isolation devices, firewalls, fire doors, steam curtains, water curtains, and fire-resistant material coatings. ⑼Fire extinguishing facilities include systems such as water spray, inert gas, steam, and foam release, as well as fire hydrants, high-pressure water guns, fire trucks, fire water supply networks, and fire stations. ⑽Emergency individual protection equipment: eyewash stations, shower units, escape devices, escape ropes, emergency lighting, and other such facilities. ⑾Emergency rescue facilities: leak sealing equipment, emergency engineering equipment, and medical treatment equipment for injured persons at the scene. ⑿Escape and shelter facilities: safety passages (ladders) for escaping and taking shelter, safe shelters equipped with air breathing systems, shelter signals, etc. ⒀Personal protective equipment and gear includes items designed to protect the head, face, visual and respiratory organs, auditory organs, limbs, and torso from physical and chemical hazards present in the workplace; such equipment provides protection against fire, toxins, burns, corrosion, noise, excessive light, falls from heights, impacts, and punctures.

Is the poster counting safety investments? It’s still the company’s equipment procurement department; the channel for discussion isn’t quite right! !

Used for designing safety facilities. For review by the Safety Supervision Bureau. How does everyone write estimates?