Matrix-UPS power on/off steps

Thread Content

1. Quickly turn the input circuit breaker (on/off switch) on and off; the LCD screen will display the operation instructions. In Bypass Mode, press any key. To return to normal operation mode, turn the Ups off – if there is no output, it’s in Bypass Mode; if there is output, it’s back in normal mode.
2. After turning the input circuit breaker (on/off switch) off, wait for a while before turning it back on; this will automatically bring the system back to normal operation mode.
3. Normal power-on and power-off procedures: To shut down the system, go to the Ups control menu, select “Turn off Ups”, click “Yes”; then select “Shut Down Load” and click “Yes”. At this point, the LCD screen will go black, and the input circuit breaker should be turned off as well. Power on: Turn on the input circuit breaker; at this point the LCD screen will be black. Press any key, and in the Ups control menu select \"Turn on load\" and choose \"Yes\". It has entered normal operating mode.