Questions about registered safety engineers [Daily question 20090315]
Thread Content
Everyone has been discussing the issue of registered safety engineers. Today’s daily question is related to registered safety engineers. Everyone is welcome to participate in the exchange. About the equipment of registered safety engineers * * What are the regulations? What aspects does the classified registration of registered safety engineers include? Answer in 21: It will be announced before 00:00, and students who participate in the exchange will be rewarded! This post was last edited by Wuyuwugui on 2009-3-15 08:36 ]
Coal mines, non-coal mines, construction units, and dangerous goods production and operating units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of production safety management personnel.； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Registered safety engineers implement classified registration, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
Coal mines, non-coal mines, construction units, and dangerous goods production and operating units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of production safety management personnel.； If there are less than 7 production safety management personnel, at least one shall be assigned. Registered safety engineers implement classified registration, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
According to the provisions of the "Management Regulations for Registered Safety Engineers" No. 11 of the State Administration of Work Safety: Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
According to the provisions of the "Management Regulations for Registered Safety Engineers" No. 11 of the State Administration of Work Safety: Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
The provisions of the "Management Regulations for Registered Safety Engineers" No. 11 of the State Administration of Work Safety: Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
Many safety regulations mention that coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees, such as the familiar "Regulations on the Management of Registered Safety Engineers", should be equipped with registered safety engineers at a ratio of no less than 15% of production safety management personnel.； If there are less than 7 production safety management personnel, at least one shall be assigned. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
The provisions of the "Management Regulations for Registered Safety Engineers" No. 11 of the State Administration of Work Safety: Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
According to the provisions of the "Management Regulations for Registered Safety Engineers" No. 11 of the State Administration of Work Safety: Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.
According to the provisions of the "Management Regulations for Registered Safety Engineers" No. 11 of the State Administration of Work Safety: Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety. I wonder how long it takes to register after obtaining the qualification of a registered safety engineer?
Regulations on the Management of Registered Safety Engineers (General Administration Order No. 11): Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Production and business units and production safety intermediaries (hereinafter collectively referred to as employing units) shall facilitate the professional and technical personnel of their units to take the professional qualification examination for registered safety engineers and the registration and continuing education of registered safety engineers.
coal mine safety； Non-coal mine safety ； Building construction safety; hazardous materials safety ； Other safety.
The provisions of the "Management Regulations for Registered Safety Engineers" No. 11 of the State Administration of Work Safety: Article 6 Coal mines, non-coal mines, construction units and dangerous goods production and operation units with more than 300 employees shall be equipped with registered safety engineers at a ratio of no less than 15% of the production safety management personnel. ； If there are less than 7 production safety management personnel, at least one shall be assigned. Other production and business units other than those specified in the preceding paragraph shall be equipped with registered safety engineers or entrust a production safety intermediary agency to select registered safety engineers to provide production safety services. Production safety intermediaries shall employ registered safety engineers at a ratio of no less than 30% of professional production safety service personnel. Article 9 Registered safety engineers shall be registered in categories, and the registration categories include: (1) Coal mine safety ； (2) Non-coal mine safety ； (3) Construction safety ； (4) Safety of dangerous goods ； (5) Other safety.