What is the role of thinners added during the coking process?
Thread Content
What is the role of thinners added during the coking process? This post was last edited by ldy6230016 on 2009-3-20 at 11:42.]
It reduces semi-coke shrinkage and increases the size of coke agglomerates.
It reduces semi-coke shrinkage, improves the lump size of coke, and enhances its mechanical strength.
What’s been said makes sense; one more point to add: it can reduce the expansion pressure during coking… preventing damage to the furnace walls caused by an overly rich blend of coals.
Thinning agents are actually components with a high degree of coalification, such as lean coal, anthracite, or coke dust; they form the pore walls of coke during the coking process, thereby enhancing the strength of the coke after reaction! :)
The addition of retarding agents during the coking process helps to reduce the shrinkage of semi-coke, improve the size of the coke, and enhance its mechanical strength. Reduce the consumption of washed coking coal and lower the cost of metallurgical coke. During the coking process in our plant, coke dust and anthracite are added as thinning agents, and the quality of the coke is quite good. This post was last edited by ldy6230016 on 2009-3-20 11:44.]
Reduce semi-coke shrinkage and improve the bulk density and mechanical strength of coke
1. Prevent the furnace wall from being damaged by excessive expansion pressure due to overly fatty coke. 2. Increase the fixed carbon content and improve the metallurgical quality of coke. 3. Enhance the wear resistance of coke
Let’s all talk about what other substances are used as thinning agents besides coke powder and anthracite
They are substances with low ash, low sulfur, high fixed carbon, and low impurities, such as petroleum coke. :handshake :handshake :lol