Micropore filter?
Thread Content
We have a microporous filter (for refined ammonium) in our factory. Recently, the PE pipe in it has become severely clogged (it took less than 3 months to replace it). I would like to ask the experts to explain the reasons and what materials should be used for the filter pipe. Nowadays, one filter costs more than 100 yuan and a replacement cost more than 10,000 yuan. It is not cheap. I hope you can give me some advice. I am waiting for this post. This post was last edited by brainandrain on 2009-3-19 16:16. ]
Cylindrical filter element: The main filter material is stainless steel sintered mesh, stainless steel braided mesh and stainless steel fiber sintered felt. The filtration precision is 0.5-200μm. It has the characteristics of good permeability, high strength, strong corrosion resistance, easy cleaning and back-cleaning, not easy to be damaged, and no material separation. use: Cylindrical filter elements are mainly used for the filtration of polyester, oil products, pharmaceuticals, food and beverages, chemical products, and also for the filtration of media such as water and air. The stainless steel sintered mesh is made of stainless steel wire mesh vacuum sintered. The cylindrical filter element made of it has the characteristics of good permeability, high strength, strong corrosion resistance, easy cleaning and back-cleaning, not easy to be damaged, and no material separation. Its overall dimensions can be processed according to user requirements.
There is a bit of a misunderstanding on the second floor.: Metal sintered materials are up to 1 micron, and the accuracy is nominal