What causes the air compressor safety valve to open frequently?
Thread Content
The Liuzhou Fuda air compressor used in our factory opens its safety valve before reaching the rated pressure. What’s going on? Everyone, please help analyze it! ! !
Please ask the original poster more details. If the safety valve opens before the pressure reaches the set level, there is likely an issue with its set pressure. Please re-pressurize and set the pressure for the safety valve.
Simple! Remove it and recalibrate the safety valve.
Check whether the set pressure is too low.
The set value of the safety valve is too low; retest it.
What the poster means is that the pressure at the outlet of the air compressor has not reached the required level, and as a result the safety valve has opened; this could be due to oil buildup blocking the flow.
It’s most likely that the oil resistance is too high.
The set pressure of the safety valve is too low; just send it for recalibration again
1# Zhang Yuzhu needs to recalibrate the security settings
9# Chemical engineer: It is possible that the reset pressure of the safety valve is too high; the safety valve has not reached the safe pressure level, so it needs to be recalibrated.
Go back to set the pressure and go to the special inspection institute.