Pressure drop issue of the two devices
Thread Content
For example: if the pressure sensing point at the upper end of the reaction system is blocked, will the instrument show an increase or decrease in pressure? What happens if the pressure sensing point at the lower end is blocked?
Since both systems have backflow media at their instrument measurement points, if a pressure tapping point becomes blocked, it will inevitably lead to an increase in pressure at that point. In this case, if the upper testing point is blocked, the gauge will show a lower value ； The lower measurement point is blocked, causing the instrument to show a higher value. This is different from liquid level and flow rate measurement in a distillation system. This post was last edited by chengkang on 2009-3-17 22:40]