Relationship between oil spray amount and gas volume
Thread Content
Discuss the relationship between the oil-lean spray volume and the gas volume in the crude benzene unit’s benzene washing tower
I believe that the oil spray amount is mainly related to the cross-sectional area of the benzene washing tower. The amount of gas is also related to the amount of lean fuel sprayed, but it is not the main influencing factor.
The calculation method is: oil consumption = 1.8 x gas flow rate, where 1.8 represents the amount of oil required per cubic meter of gas per hour.
When the volatiles content of the coal loaded does not exceed 28, the amount of circulating wash oil can be set at 1 T per 0.5–0.55 m³ of dry coal loaded； When it exceeds 28, the oil absorption volume should be set at 1.6–1.8 L per 1 m³ of gas