Can traffic control and variable frequency combination regulation reduce the flow rate by half?
Thread Content
The return flow rate of anthracene oil in our plant is between 3.8 and 4 cubic meters. Previously, a pump with a capacity of 8.4 cubic meters worked well, with the frequency of the inverter at around 50%. It’s leaking oil severely ； It has now been replaced with a 18-cubic-meter pump that uses hot oil. Although the pump no longer leaks, it has become more difficult to regulate it; an increase of 0.1% in frequency results in a drop of about 8 degrees in the maximum temperature. The pump outlet pipeline has not been changed to 50. Dear sea friends, how can adjustments be made to achieve the right setting?
Can’t you lower the frequency of your inverter directly? Why choose such a large one? It’s such a waste
The previous ones, which were not oil-based, often leaked oil.
I would like to ask what traffic control is Thank you!
It can be achieved by reducing the frequency to a certain level and then adjusting the return valve of the bypass, right? 、