[Phase 1 of Time-Limited Quick Response Contest] 045 [Completed]
Thread Content
Rules: 1. If you want to answer immediately, please give a score of +1 wealth to floor 1 and write your answer in the “Reason for action” field (only the content within parentheses); see the image below for details. 2. One “*” represents 1 Chinese character (or 1 digit), and the answer must match exactly to be considered correct. 3. The first person to answer correctly will receive +10 wealth points; please reply in the comments on floor 2 or below to claim the reward ； 4. The scope of questions covers the commonly used standards and experience manuals in the fields of process engineering and piping ； 5. The difficulty level of the questions increases from easy to difficult. 6. Lower-grade students are welcome to participate actively. Question for this issue: 045. Pipes of type (********) or similar should be fitted with insulation to reduce noise (the thickness of the insulation layer should be at least 50 millimeters). Standard answer: The vent pipeline with high noise. Winner: None. This post was last edited by hutom123 on 2009-3-28 at 17:11.]
045. (Devices that generate high noise) or similar pipelines should be fitted with insulation to reduce noise (the thickness of the insulation layer should be at least 50 millimeters).
Noisy pipes and equipment, such as vent pipes and heating furnaces with burners, should be fitted with insulation to reduce noise; the minimum thickness of this insulation is 50 mm. ;P
Noisy pipes and equipment, such as vent pipes and heating furnaces with burners, should be fitted with insulation to reduce noise; the minimum thickness of this insulation is 50 mm.
Devices that generate high noise or similar pipelines should be fitted with insulation to reduce noise (the thickness of the insulation layer should be at least 50 millimeters).