【Daily Question 20090323】Please discuss the models and technical specifications of the DCS main controllers from various manufacturers
Thread Content
Please discuss the models and technical specifications of the DCS main controllers from various manufacturers. These specifications are relatively easy to obtain; it depends on everyone’s level of knowledge. If you are familiar with a particular manufacturer, you can discuss its products within that series. Those with more in-depth knowledge can talk about factors such as the processor speed, memory, and load capacity. Knowledge is acquired through accumulation, and I hope to use this approach to clarify information about these products. Unfortunately, there are not many participants; next time I will change the topic to make it more practical. I hope everyone will organize their thoughts and speak freely, actively participating in the discussion, and those who offer valuable insights will be rewarded generously. This post was last edited by wopale3 on 2009-3-24 09:25]
The Allen-Bradley Macs3 CPUs are available in the models FM801, FM803, and FM801. The hardware configuration of the FM801 includes a CPU that is an embedded Intel 486DX4-100 compatible processor; it has 16MB of DRAM, 1MB of SRAM (with battery), and an 8MB SSD (solid-state drive) with the operating system pre-installed. The FM803 features an Intel Pentium MMX 266 processor; it has 16MB of DRAM, 1MB of SRAM, and a 32MB SSD (solid-state drive); the minimum amount of SSD storage is 8MB. The FM801 has an Intel Pentium MMX 233 processor, 32MB of 168-pin DRAM, 1MB of SRAM (with battery), and a 32MB SSD (solid-state drive); the minimum amount of SSD storage is 8MB, with the operating system pre-installed
Zhejiang Zhongkong JX-300X CPU model SP243X, number of AO output points