Looking for flocculant manufacturers

If it’s something like PAC, there are many such options in Gongxian County, Henan Province, and they’re also inexpensive. For example: Gongyi Huatong Filter Materials Factory, 0371-64030268； Gongyi Longxiang Filter Media Co., Ltd. 0371-64109169

Products with a high PAC content range from about 28-35%; the price is 3,000 yuan per ton. We source them from Gongyi in Henan as well; you can check it online.

Farson in Jiangsu, I guess; it’s from France. It’s quite famous.

The original poster is advised to buy it in Henan or Guangdong; the current price is no higher than 900. The quality in Henan is slightly inferior, but it’s cheaper. There are many good options in Guangdong, but they are more expensive. Henan also has good ones; you need to be careful in making the distinction.

The flocculant should be polyacrylamide, not PAC. The largest manufacturer of cations is likely Henan Kaibao Chemical. The annual production capacity is 10,000 tons. The largest anions should be in Daqing. :lol

The coagulants and flocculants from GE’s Water Treatment and Process Solutions department can improve pretreatment efficiency and help increase the water supply to RO systems. GE’s solutions are suitable for the following processes: direct filtration processes, multi-media filters and clarifiers, as well as other gravity separation systems. SoliSep™ series of products: http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Accelerates solid-liquid separation. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Compatible with all RO membranes and synthetic membranes. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Meets the SDI water supply specifications set by membrane manufacturers. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Offers improved resistance to permeation breakthrough compared to metal coagulants. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Has a stronger color-removal capability than organic polymers. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Works across a wide range of pH values. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Reduces flushing time and the amount of backwash material needed. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Lowers treatment costs. The JelCleer™ filtering media feature artificial active surfaces that can adsorb various types of colloidal substances. The JelCleer filtration media reduces the frequency of system cleaning and extends the lifespan of the device and the membrane. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Its filtration capacity not only meets but also exceeds that of traditional coagulants. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg It can be used in conjunction with existing filtration equipment. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg Compared to traditional filtering agents, it results in lower operational costs. http://www.gewater.com/images/cn/global/nav/node_arrow.jpg The backflow rate is significantly reduced.

Selection of coagulation agents: Various coagulants and polymer flocculants are added before mechanical filters to remove impurities such as suspended solids and colloids from water. However, if these agents are added indiscriminately without taking into account the actual conditions of the water source, it not only fails to improve water quality; on the contrary, it may introduce substances harmful to RO membranes due to the agents themselves or the impurities contained in them. Many water treatment systems in China suffer from this problem. Therefore, the choice of medication is highly particular. Based on the characteristics of RO membranes: ① Aluminate salts should be avoided as coagulants. Aluminum salt coagulants tend to produce aluminum gel during the coagulation process, and this gel is difficult to remove once it reaches the surface of RO ； ②Cationic polymer flocculants should not be used. RO membranes are anionic; cationic polymer flocculants tend to bind to the membrane, resulting in a polymer membrane that is difficult to clean. If these issues are not addressed, it may result in a shortened lifespan of the membranes, or in the worst case, some of the membrane elements will become unusable. At the same time, the compatibility between different chemicals cannot be ignored; for example, if ST polymer flocculant is used, it should be employed together with ArgoAF150ul.

The price for solids is around 1000, while that for liquids is around 500. The content of active ingredients is standard and can be verified; the manufacturer must provide relevant specifications. This post was last edited by li*ch1968 on 2009-4-4 09:09

Thank you all for your replies :) I already have a goal