The problem of low gas production?
Thread Content
Coke oven waste gas production has always been determined by theoretical calculations. Is there any specific measurement method?
A flowmeter is installed after the fan for detection. Then convert to standard conditions based on temperature, pressure and partial pressure of water vapor.
Generally, a flow meter is installed in the gas pipeline after the gas blower to basically measure the raw gas output.； Some design flow meters after crude benzene is recovered to measure the net gas flow, which can be converted into raw gas volume based on temperature, pressure, etc.
How to calculate gas volume! I don't quite understand the algorithm! Ask for advice
There is no means of measuring raw gas. Generally, a gas flow meter is installed on the gas pipeline after crude benzene washing. If you want to calculate, then convert it.
Our factory installs a gas meter after the crude benzene, and the crude gas yield is generally calculated based on that value (operating pressure effect).