Does any friend know anything about Endu powder gasification technology?
Thread Content
My understanding of Ende’s coal gasification technology is not deep enough; for example, I am not clear about how factors such as the gas-to-coal ratio, coal quality, furnace temperature, and furnace pressure affect the quality of the generated gas and what the relationships between these factors are This post was last edited by jensse on 2009-3-23 16:43]
I learned some of this before; lignite was used, and the furnace temperature should be between 900-1000 degrees, with the temperature having to be kept below the ash melting point. The furnace pressure should not exceed 14.5 KPa.
The Ende furnace is designed primarily for younger coal types such as lignite, bituminous coal, anthracite, and weakly caking coal, with a temperature set about 200 degrees below the ash fusion point of the coal℃
Does anyone have a more detailed one? Thanks!
Process flow description (gas generation system): The contents included in the process flow range from the coal powder funnel to the gas outlet of the U-shaped water seal in the washing system. ——The coal feeding system consists of the dried and qualified coal supplied by the coal preparation system (particle size
5# Northeastern man, thank you so much for your reply. Could you please provide some guidance on the operational techniques? For example, the gas-to-gas ratio, oxygen-to-coal ratio, fluidization volume, and how to adjust the oxygen concentration when making changes. Thank you!