In CS3000, under TEST, the configuration cannot be modified
Thread Content
Currently, I am facing a difficulty while testing a project. Set the control station to TEST for simulation testing; the modified configuration cannot be reflected in real time. One can only exit the test—make the modifications, and then go back into the test to see the effects of those changes. The efficiency of modifying flowcharts is very poor. I wonder if any of you have encountered this before – how did you solve it?
No, just make the changes and save them. If everything is correct, the system will ask whether you want to change the program in the controller; select yes. The interface becomes even simpler: just make the changes, save them, then switch to another screen and return to the one that was being edited – the changes will be applied.
The screen needs to be updated. Additionally, if you have multiple HIS units, the GRAPHICS used for testing are usually those from HIS164; therefore, if there are multiple HIS units, it’s best to synchronize the screens first and then refresh them again, so that you can see the changes made
For simulation testing, the configuration can be modified; once saved, it can be uploaded to HIS. The flowchart needs to be drawn by oneself, and it can be designed to look very good. If you have any questions, feel free to add me on QQ: 616732613
I know how to use the testing feature. There must be a problem now. The flowchart modified in test mode does not work after being SAVEd.
It’s because saving doesn’t work that I came here to ask; have you guys never encountered this situation?
I had to uninstall the CS3000 and reinstall it.
For this testing function, I even reinstalled XP specifically; I didn’t install any other software except for the CS3000. Even after that, it was still not possible to modify the flowcharts using the testing function. Actually, I tried reinstalling it before and it seemed to solve the problem, but this reinstall didn’t work either; I really don’t know what to do anymore.
I’ve encountered this problem too. Reinstalling CS3000 didn’t work! How to solve it?