What should one learn when first arriving at a chemical plant?

1. Safety knowledge. We know that chemical plants are quite dangerous; generally, one needs to go through three levels of safety training before being allowed to enter the plant. We hope the original poster won’t just go through the formality and will study safety seriously, as this will be of great benefit to them in the future! 2. Familiarize yourself with the process flow as soon as possible! 3. Manage your relationships well, especially with the mentor who is guiding you, as that way you can learn a lot. 4. You need to work calmly; don’t think about changing jobs from the start. It’s not too late to do so after you’ve learned something.

First, get familiar with the process, and then examine each small detail one by one, especially the advantages of certain cycles

First, it depends on what specific tasks you will carry out at the factory. Whatever the tasks may be, you need to first become familiar with your own duties, learn as much as possible from experienced workers – being humble is very beneficial for you, and accumulating work experience is the top priority! ! !

First, get familiar with the process flow (if it is a manufacturing process), and learn as much experience as possible from the supervisor who is guiding you, so as to make thorough preparations for your own improvement. One more thing to tell you: be low-key in life, but high-profile in your actions

When I first arrived at the chemical plant, I thought it was important to learn about safety first, including the safety regulations applicable within the plant and in the industry as a whole; many of these regulations stem from painful lessons and experiences. Secondly, one must become familiar with the process flow of their own position, as well as the materials and processes related to that position, and quickly get to know the overall processes of the entire factory. Third, it is very important to maintain good interpersonal relationships

Let me remind you that starting work does not mean you can stop learning* or think that learning* is unimportant; in fact, the real process of learning* has just begun. First and foremost, three levels of safety training are essential (factory level, workshop level, team level). You must understand that safety in chemical production is of top priority, and this idea should be firmly ingrained in your mind； After completing the study of safety principles*, one can proceed to learn the theoretical aspects, mastering the basic principles of industrial processes. Starting from an overall perspective and moving on to more detailed aspects, once one has acquired some theoretical knowledge, they can go to the site together with a supervisor to get an understanding of the basic conditions in a chemical plant. (It is important to remember not to touch anything at the site without the supervision of a supervisor.) After that, one can study the processes in greater detail by referring to flowcharts. Once the processes are understood, it becomes possible to combine theory with practical experience, which should make learning faster. In your work, you should spend more time studying chemical engineering theories related to your field of work; this will be of great help in improving your skills. The Haichuan Forum is an excellent place for learning. It might seem like advertising, but that’s indeed my opinion. Wish you success in starting your job soon, and that you can become a qualified and excellent member of the chemical industry.

Even in death, only half of the brain’s resources are utilized; it’s a waste not to learn

Be low-key in personal life but high-key in work. I agree; it’s important to build good relationships with experienced colleagues and learn from them as much as possible*

It’s of course the process. The core of a chemical plant lies in its processes, which are often regarded as the key documents; all equipment is designed around these processes. Equipment is concentrated in those areas, and since the processes vary from one plant to another, there are significant differences in products and efficiency as well

It would be best if the poster could mention what position they hold.:handshake

First, become familiar with the processes in your workshop, down to every detail. Then, based on your theoretical knowledge, use your creativity to come up with ideas for process improvements. After those improvements are successful, you can even write papers on them. Only by keeping learning can one continue to improve!

It is essential to master the operation and maintenance of the entire set of equipment, the process flow, as well as the precautions for operation

Ask more, learn more, do more! Focus on processes and techniques!

1 Study the process flow diagrams and PID charts. 2 Compare the on-site situation with the process flow diagrams and PID charts. 3 Understand the function of each valve. 4 Know the destination of each pipeline. 5 Observe frequently and ask many questions

1. Follow the process pipelines. 2. Ask experienced workers for process flow diagrams and study them in comparison with reality. 3. If you work shifts, it’s best to get to know the workers on that shift; they can be of great help to you. 4. It comes down to interpersonal relationships – be polite to others and smile often

I agree with everyone; the manufacturing process is the most important. You need to learn that when a problem occurs, you should be able to immediately identify which stage in the process is at fault. To the level of an engineer

I still think it’s important to build good relationships, excel in studies, and also learn other specialized knowledge. Building good interpersonal relationships is easy to learn, with many people available to teach.

Thank you for sharing your experience; I need to start looking for a job in the second half of this year as well.

1. Safety knowledge, including the properties of materials, their toxicity, and handling methods. 2. Process flow, reaction principle, and operation method. 3. Accident handling and preventive measures for non-conformities.

Thank you all for your suggestions; it’s been very enlightening. What I do is purification using the Lind process. Previously, it was learned at school*, such as the four major chemistry fields and chemical engineering, etc. Suddenly being in the factory made me feel like I didn’t know anything. At first, I really wanted to back out, thinking it might not be my strength or something I enjoy. But as human beings living in this fast-paced and complex society, it’s not possible to have everything go as one wishes; therefore, I decided to stay and study hard* and work hard. As everyone has said, safety is the top priority for a factory; therefore, there is considerable concern regarding the safety issues in chemical plants. Also, I’m still very nervous when it comes to operating things; for example, I hesitate even when moving valves. So incompetent.