Issues with the EJX910A transmitter
Thread Content
1. How can the configuration information of the orifice plate be viewed on the 910A? 2. In that kind of situation, why can’t the remote controller be connected to the watch (a resistor of 250 ohms to 700 ohms has been connected)?
It is necessary to install MVTool and the FieldMate configuration software. With 375, only the basic information of the transmitter can be viewed, such as the range and tag number. If the handheld device cannot communicate with the transmitter, check whether a 250-ohm resistor needs to be connected in series, or examine the COM interface; if necessary, modify the COM port.