Boiler for producing soda ash
Thread Content
I want to build a small caustic soda plant to specialize in the production of liquid caustic soda. What kind of boiler is needed? Is it a pressure boiler? Can any expert give me some advice? Thank you. Thank you for producing liquid caustic soda as a carton adhesive. Is there any small equipment that can produce 10 tons a day? Can it use a steam boiler and a dissolving drum? This post was last edited by a refinery worker on 2009-3-27 18:48 ]
When we use liquid bubble alkali, solid water glass is melted with 6 to 8 kilograms of steam, and the amount of steam used is large, impactful, and the pressure is unstable. So I think the pressure of the boiler should be at least 8 kilograms. The tonnage of course depends on the output, but now small coal stoves are not allowed to be installed, so it is more convenient to buy steam.
I want to build a small caustic soda equipment to produce liquid caustic soda for use as carton adhesive. Is there any small equipment that can produce 10 tons a day? Can it use a steam boiler and a dissolving drum?
It is necessary to have a steam boiler to provide steam into the heating tank. The heating tank rotates to heat the water glass. Our unit has produced heating tanks for the production of soda ash. The boiler is also provided and installed by our unit. If you need it, you can contact our unit!
How to contact your company:handshake
Telephone: 0632-3759587 Shandong Mingrun Machinery Co., Ltd.
You can use the local method to mount the horse. After adding the materials and water into the cylinder, close the lid. A small coal stove is used to heat the rotating drum. After reaching the pressure, the amount of coal is reduced to keep it warm. After a certain period of time, the material is released. The disadvantage of this method is that it consumes a lot of coal and the site is not very clean. Operation requires care. The advantage is that it only requires one pressure roller and does not require too many transmission and sealing devices. The drum can be stopped and the material can be discharged without the need for a sealing device that is rotationally connected to the pipe. It fits the situation you're talking about.