How to design the ground wire bar and neutral wire bar in the control cabinet
Thread Content
How to design the ground wire bar and neutral wire bar in the control cabinet? Factors to consider!
Arrange two copper rods in the cabinet, and drill many holes with wires on each copper rod for connecting the ground wire.
Install the copper screws under the cabinet, screw the ground wire together and then screw it to the copper bolt
The method is easy to implement. The key is to consider the capacity issue when making the ground wire row and neutral wire row! How big of a copper rod or how wide and long of a bronze medal do you want?
What I have seen should be to fix the grounding bolt at the bottom of the cabinet, mark the grounding, and then lead all the grounding wires to the bolts. As for the design, it depends on the specific situation and where it is more suitable to place it in the cabinet. Just design it there and it will not affect the normal function.
The instrument cabinet grounding is divided into shielding ground and protective ground!