FRP pipes
Thread Content
What is an appropriate spacing for the supports of fiberglass-reinforced plastic pipes? For pipes with a diameter of DN250 and a pressure rating of PN1.0… Ah, sorry, it’s a solution with a specific gravity of 1.35. This post was last edited by yjs90566575 on 2009-3-27 at 11:17
It depends not only on the material of the pipe but also on the medium that flows through it. Without such clarity from the original poster, it’s impossible to give an answer
It depends on the weight of the medium flowing in your pipeline. If it’s light, keep the distance larger; if it’s heavy, keep the distance smaller
The original poster is really careless – what kind of medium is that? Liquid gas? Ignore things like specific gravity: L
Glass fiber reinforced plastic pipes are green in color; they possess a certain degree of toughness but low strength. Therefore, care must be taken when using them, attention should be paid to the operating temperature, and the distance between pipe supports should be determined based on the properties of the material