Lubricating oil system for Luchi gasification unit
Thread Content
Which expert can provide the manufacturer of the lubrication system for the shaft packing of the rotating grate in Lurgi gasification units, as well as for the packing gland of the ash lock valves? This post was last edited by jensse on 2009-4-23 at 13:11.]
Buy a multi-point lubrication pump and do it yourself
Go and visit the relevant manufacturers, see what others are using, and have more exchanges
Shaft packing for rotating grate: It is recommended to use graphite packing rings with nickel-wired fillers, using softer materials on the inner and outer sides and a harder material in the middle. Lubrication system for the packing box: Select a multi-point lubrication pump based on the number of points required; place it near the packing box and configure the pipelines accordingly. The lubricating oil goes in two paths: one to lubricate the packing, and the other into the spaces between the pinion teeth. It is important to ensure that the position of the packing ring is aligned and that the oil flow remains unobstructed. When parking, check and replace the packing in a timely manner
At least for now, lubrication systems based on the Shanghai Tonglu design are more commonly used in Luchi furnaces.
Shaft packing for rotating grate: It is recommended to use graphite packing rings with nickel-wired fillers, using softer materials on the inner and outer sides and a harder material in the middle. At present, Yima in Henan and Tianji in Shanxi have had the manufacturers modify such packing rings; you can go and take a look in person. Shanghai Tonglu is the top choice in China for lubrication systems.