I’ve been transferred to the engineering department – what should I do?
Thread Content
I am a fresh graduate from 2008, majoring in petrochemical engineering with a focus on process technology. I have now been transferred internally to the engineering department, and there are so many things I don’t understand. I don’t even know where to start when asking my mentors and colleagues for help. I would appreciate any guidance you can offer; thank you very much! :( This post was last edited by laiqi on 2009-3-30 20:50 )
Hehe, then you have to learn a lot of things: manufacturing processes, equipment, electrical systems, instruments, civil engineering, materials, corrosion prevention, and so on and so forth… It will take at least three to five years before you can take charge of the manufacturing processes and work effectively with professionals from other fields.
Determine how to learn based on the actual work you are involved in. Since the Engineering Department is responsible for such a wide range of tasks, there isn’t much that can be done; there’s too much to learn. It’s a good idea to handle each specific task individually
Let’s first look for relevant books! And take a look at the projects I’ve worked on before!
Once you join the engineering department, your supervisor will surely assign you tasks, right? You can’t just keep sending money without doing any work: lol. Once there’s actual work to be done, you’ll encounter problems. Of course, it would be better if there were no problems; that way, the manager will assign you more work until you encounter issues. Problems provide the motivation for improvement; solving problems means enhancing one’s abilities. This will do for a few years.
Personal advice: 1. Don’t be impatient; be patient and thoroughly immerse yourself in the actual work； 2. If you approach each specific task with a thoughtful mindset, you will definitely discover many problems ； 3. Everyone around you – managers, operators, and even construction workers – are your teachers. Take the simplest example: when a buffer tank on-site needs repair, the order in which bolts are tightened is usually done in a cross pattern across from each other. Why? Start by learning from the little things around you; I believe you will gain a lot from it. :)
The Engineering Department is the best unit, as well as the one where it’s easiest to learn. You get to work with various construction methods and processes, which is a great way to gain experience. You’re really lucky to be there. Of course, it can also be a place where certain problems arise; it’s up to you to decide what path you want to take
To be honest, starting by working in the engineering department is a great opportunity for you, but it also puts you right at the forefront of society, which can easily lead one astray. Adhere to principles, learn more from the grassroots – there is knowledge to be found in every aspect of engineering.
Study hard*, start with small things, with specific tasks, and gradually you will grow
The Engineering Department is the core of construction production scheduling in the project departments; it carries out its work under the leadership of the managing manager, and oversees and coordinates the construction management functions of all project departments as a whole.
I also just joined the engineering department. At first, it was difficult to understand everything, but things have improved a lot now. My insights are as follows: First, go to the site often to learn about the actual production processes. Second, ask questions when you don’t understand something; it’s not scary to not know something, but it is scary to not ask for help. Third, be brave enough to admit your shortcomings in front of your supervisors. Fourth, visit more professional forums to learn more, such as the Haichuan Chemicals Forum, which is quite good. Fifth, understand the scope of your work, that is, clarify your role. Sixth, regularly reflect on your own work
The fastest way is to apply to work on a construction site, spend about half a year there working hard, ask lots of questions, and learn as much as possible – progress will be rapid in that case
I have also worked in the engineering department for many years and have some experience. 1. Since you’re just starting out, give fewer opinions and focus more on listening, remembering, and learning. 2. Analyze using specific examples. 3. The core skill is craftsmanship; one must master it thoroughly. 4. There’s no need to be an expert in other fields, but one must understand the processes involved. 5. It’s still necessary to keep learning and reflecting. 6. Go to the site firsthand and be willing to endure hardships
We are currently in the construction phase; any specific suggestions would be greatly appreciated! ! !
Could you list a few specific beginner-level, fundamental books? I don’t understand many of the terms right now
Engineering department? It’s a rather boring department; it is generally divided into electrical and mechanical sections. The process-related tasks should be separated into their own section, called the PE department. Since you work in process management, you might as well go to PE – it’s easier to turn tasks there into projects and business opportunities. The engineering department, on the other hand, is quite rigid. :lol
I’m similar to you, brother – I have advanced skills; I graduated in 2006 and have been working in project departments for three years now! I’m starting to get a clue now; take it slow, learn more and observe more, and over time you’ll understand!
Could that senior share some experience from his own perspective? Thanks! !