Calibration and maintenance of DLC300 series sinking tube liquid (boundary) level transmitter?
Thread Content
Hello everyone, I would like to ask for advice and verify whether my idea is correct. (1) For Fisher's DLC3000 series smart sinking cylinder, assuming that the sinking cylinder meter in use is damaged and needs to be replaced with a new one, just like other pressure or differential pressure smart transmitters, just input the configured parameters into the new meter, right? (2) If online adjustment is required, how to do it with 275?
I haven’t used the smart sink bucket yet. Can it be operated with a hand operator? study *
After the meter head is replaced, the parameters should be set and verified.
Both dry school and wet school are possible. The density and installation method need to be set. It can be divided into left and right installation.
1. Replace the meter with a new one, and then calibrate it with 275 or 375. 2. Upload a method of using 275 to train DLC3010. Find it yourself.
We have just changed it. You can use the communicator to copy the value in the previous meter and then use it on the new meter. Or you can record all the previous parameters and set them again. In this way, the parameters are completed. You can start calibration. . .