How to calculate the water content in the flue gas from the purification unit
Thread Content
The purification process consists of venturi effect – packing – power wave – two-stage electrostatic fogging. The composition of the flue gas at the venturi inlet is known; how to calculate the moisture content of the flue gas at the venturi outlet, as well as in the packing tower and during the power wave stage?
Personally, I believe that the flue gas at the venturi outlet and the flue gas at the shock wave outlet can be calculated as saturated flue gas; although there is an error, it remains a viable method.
Refer to the mass balance section in \"Sulfuric Acid Production Technology\"; it’s quite detailed.