Calculated mass of oil in a floating roof tank
Thread Content
Do you have any good suggestions regarding the calculation of the mass of oil in floating roof tanks? Please help!
By using the sampler correctly and following the measurement procedures strictly, the quality of the samples can be ensured to the greatest extent, while contamination and losses are avoided.
The second floor might have misunderstood; what the original poster actually needs is a method for calculating the oil volume in a floating roof tank. It is necessary to use various volume tables, different coefficients, temperature, density, the weight of the floating disk, and so on in order to calculate the amount of oil contained in the tank.
It’s a bit troublesome – measurements require determining temperature and density, as well as figuring out which range the float is in in order to consult the volume chart.
There is an oil calculator that our company has used; it requires the input of standard density, tank temperature, and VCF value in order to calculate the amount of crude oil in the tank minus the weight of the floating buoy. However, standard measurement must still be followed during the measurement handover. The other party just approved it
That expert, please help solve it; I also need information on this topic