Where should I start when learning equipment?
Thread Content
I just started working on equipment and I don’t know where to start. I hope you guys can give me some information. Especially the basic ones. Thank you!!
Equipment principles, structure, usage parameters, causes and solutions of prone failures, maintenance is a learning process* good opportunity
First, classify the equipment in as much detail as possible, list the main uses, carefully read the equipment instructions and safe operating procedures, then figure out the equipment principle, structure, and usage parameters, and participate in the installation, debugging, troubleshooting and cause analysis of the equipment. This is one of the fastest ways for beginners to improve.
⒈Start by learning how to make equipment reports； ⒉Write down what you don’t understand in the report and learn it step by step ； ⒊When writing summaries and essays, you don’t know how to ask questions, look up information, and ask others for advice.
First, clarify the equipment categories, mainly divided into dynamic equipment and static equipment, and then subdivide the structure and principles of each subcategory. Look at the drawings and equipment. Once you are familiar with the above work, you can further develop.
I don’t know if you are engaged in design or maintenance. If you are engaged in design, learn more about the standards. It is best to follow the teacher to design twice. You learn while doing, and you learn the fastest. That’s how I am. I originally studied* Automobile majors just start working slowly.