Retaining plug – Issues related to the preparatory work at the catalyst loading site, Question 1
Thread Content
Close the inspection nozzles and insert the retaining plugs. The above are the preparatory steps for the inspection holes on the reactor during catalyst loading; what is the more professional term for inserting the retaining plugs? This post was last edited by niulijun117 on 2009-4-2 13:24.]
Plug the inspection port tightly and insert a stopper.
Product name: Zinc block fixing bolts. English name: Zinc anode retaining plugs (Found on the internet; not sure if this is the correct term?) ) So that means—seal off the inspection port and tighten the fixing bolts?
I did a Google search, and it seems that “retaining plugs” refer to fixing bolts; if there is a “the” before them, it denotes specific fixing bolts. Similar content can be found on the webpage http://www.rigrite.com/spars/SparParts/Tangs-complete/T-Ball_Backing_Plates.htm; the Plate Tangs correspond to the Retaining Plugs.