Pressure difference at the outlets of the Stage 1 and Stage 2 towers for accident chlorine

2009-04-02View Original

Thread Content

This post was last edited by sunjl1981 on 2013-1-6 at 19:56. The pressure differences at the outlets of the first and second stages of the chlorine treatment unit are not significant; currently, the outlet pressure of the first stage is -1.2 Kp, while that of the second stage is -1.3 Kp. Under normal conditions, it should be -1.0 to -1.5 Kp for the first stage and -1.8 to -2.5 Kp for the second stage. If pressure is adjusted at the secondary level, the pressure at the primary level will also increase, resulting in insufficient backflow of the alkaline solution in the primary tower and an increase in liquid level. Currently, the pressure is too low, and there is concern that insufficient suction may lead to chlorine leakage; aside from this, no other problems have been detected. How can this issue be resolved? # ，， &

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Pressure difference at the outlets of the Stage 1 and Stage 2 towers for accident chlorine

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links