Seek examples of crude oil tank design
Thread Content
I am looking for an example of the design for a crude oil storage tank with a capacity of 150,000 cubic meters. If any kind person can help provide it, I will offer compensation!
Manufacturing, inspection, testing, and acceptance shall be carried out in accordance with GB50128-2005 \"Code for Construction and Acceptance of Vertical Cylindrical Welded Steel Storage Tanks\". Welding of the equipment shall be performed in compliance with the requirements of JB/T4709-2000 \"Welding Code for Steel Pressure Vessels\". Weld joints of the tank wall plates and bottom plates shall be inspected using JB/T4730.2-2005 \"Non-Destructive Testing of Pressure Equipment\"
Friend upstairs, what I need are some design examples with clear design steps and calculation processes. Thank you for your reply.
Is the friend upstairs working on a graduation project?
Hehe, the friend above is right; since this is my first time working on such problems, I need some reference examples. Thank you for continuing to post comments.
The 150,000 cubic meter storage tank has an inner diameter of 100 meters and a height of 22.8 meters. The design standards are API620 or API650; the tank wall is designed using the variable node method. For the lower layers of the tank wall, steel with a yield strength of 490 series is generally used, while for the upper three layers or more, Q345R material can be employed. The wind-resistant rings and reinforcement rings are designed in accordance with national standards, and the structure can be constructed in compliance with GB or API standards. The backtracking calculation is carried out using Pan Jiahua’s method; a two-layer warehouse is preferred.
According to which standards were the diameter and height of that one on the upper floor determined? I would appreciate it if you could provide more details. Thank you very much! ! ! !
Haha, I see you here; everyone, please reply!