How much methanol catalyst is required to produce 1 ton of methanol?
Thread Content
I’m quite ignorant and inexperienced. I would like to ask the more knowledgeable folks: how much methanol catalyst is needed to produce 1 ton of methanol? Could you help me analyze this? It would be even better if you could provide an example of the production capacity of methanol catalysts in a well-known company. Thank you~\(≧▽≦)/~
This mainly depends on the process design, temperament, as well as operation, etc. It is a systemic issue. Also: Is it for a short period of time? Or is it the consumption over the total lifespan? The best in China is C307 from the Research Institute of Nanhua Group, with a catalyst capacity of 24,000 tons of methanol per cubic meter. It was achieved at Lunan Fertilizer Factory.
It mainly depends on the composition of the catalyst, as well as the manufacturing process and operating conditions. The amount of catalyst in the synthesis tower is also important. A catalyst generally lasts for 2 to 3 years; this can be determined by dividing the total production volume by the amount of catalyst used
This depends on the choice of process, the quality of the gas components, the selection of catalyst, and the normal operating conditions of the catalysis.
It is also necessary to distinguish between glycol or monol alcohol plants, as there are significant differences in that regard.
The question is a bit vague! It is determined specifically based on the properties of the catalyst and the amount of intake air.
The question is a bit vague; under the condition that side reactions are ignored (with selectivity assumed to be 100%), yield = yield percentage * catalyst volume. The amount of catalyst required to produce one ton of methanol per unit of time is what is referred to as the yield. The yield can be simply seen as a measure of catalyst activity. There are many factors that affect the yield, such as temperature, pressure, gas composition, and space velocity. Under specific conditions, the yield can be calculated based on the production volume, that is, the amount of catalyst needed to produce one ton of methanol per unit of time.