Three-Character Formula for the Operational Procedures of Carbon Dioxide Compressors”
Thread Content
“Three-Character Formula” for the Operational Procedures of Carbon Dioxide Compressors: Compressors must be operated with skill; one needs to understand their structure, principles, performance, and operating processes. One should know how to operate them, maintain them, and diagnose any issues. Before starting up, conduct a thorough inspection of the system, activate the oil pump, and then rotate the compressor manually. Contact the electrical team and check the instruments. Ensure all conditions are met before initiating operation. Follow the instructions carefully. During idling, keep an eye on the system. Once everything is normal, shut off the waste discharge valves, then gradually close other valves to prevent pressure buildup. Inform the control room staff. Before sending the gas to the tower, carry out regular inspections and follow the procedures strictly. Do not violate regulations or act recklessly. Pay close attention to the instruments, and keep records in an orderly manner. In case of abnormalities, remain calm, identify the root cause, and resolve the issue. Everyone should keep this in mind to avoid accidents. This post was last edited by 1025199692 on 2009-4-6 at 07:26
Second Edition: “Three-Character Formula” for the Operational Procedures of Carbon Dioxide Compressors. Compressors operators must have thorough knowledge of their structure, principles, performance, and operating processes. They should be able to operate them, maintain them, and diagnose any issues. Before starting the compressor, conduct a thorough inspection; ensure that the circulating water is in order. Open the inlet and outlet valves, start the oil pump, and add oil. Then rotate the compressor shaft manually. Notify the electrical crew and monitor the instruments. Stop rotating the shaft once all conditions are met. Wait for instructions before starting the compressor. During idling, keep an eye on the situation. Once everything is normal, gradually close the waste discharge valves, shut down the circuit, and release pressure. Inform the control room before opening the output valves. Before sending the gas to the tower, carry out dehydrogenation processes. Conduct regular inspections and follow procedures carefully. Do not violate regulations or act recklessly to ensure safety. Pay close attention to the instruments, and keep records in an orderly manner. In case of abnormalities, remain calm, identify the root cause, and resolve the issue. Be alert to problems such as water or oil shortages, cylinder fluid shock, severe impacts, abnormal vibrations, smoke coming from the machine, potential fires, excessive current, high temperatures, or high pressures. In such cases, stop the machine immediately. I wrote this text so that everyone can remember it, thereby preventing accidents. It’s all done with the aim of ensuring stable production for the company. This post was last edited by 1025199692 on 2009-4-6 at 07:59