Oval container
Thread Content
What should be considered in the design of oblong containers； Do the cover plates need reinforcing ribs?
Reinforcement bars are generally required at the legs and seat areas; if mixing is involved, reinforcement bars are also needed at the mixing openings on the cover plates. There are relevant guidelines available online; you can give them a search.
Whether to add reinforcing ribs depends on the size of the cover plate. Set up the large ones, but not the small ones.
The original poster’s question is too general to answer directly. The design parameters for vertical containers and horizontal containers are not exactly the same. It is recommended that the original poster provide more details when asking questions, so that other users can help.
Horizontal type, with flat surfaces on both the top and bottom; volume is 100 m^3. The thickness of the upper cover plate is 8 mm, while that of the lower base plate is 10 mm