Calculation of material ratio
Thread Content
For a direct conversion system with a methanation outlet flow of 20,000, how can the material ratio fed into the conversion section be calculated? (Natural gas, air, water vapor) This post was last edited by yfq4308 on 2009-4-6 15:34]
Regarding the issue raised by the original poster, the following parameters need to be clarified in order to carry out the calculation: 1. The composition of natural gas. Due to the differences in their components, the adjustment of material quantities in the design will vary, which means that the relevant data in the final material balance sheet will differ as well. 2. The relevant data vary depending on factors such as the conversion catalyst used in the conversion process, the conversion pressure and temperature, and the water-to-carbon ratio. 3. Different decarburization technologies are used in the decarburization process, which in turn leads to different choices regarding the water-to-carbon ratio in the conversion process, and this also affects the relevant data.
Thank you. Engineering calculations are really troublesome; I’ve looked through lots of materials but still can’t figure it out