How is the foundation of tower equipment designed?
Thread Content
How is the foundation of tower equipment designed? Does anyone have information on this?
You can use the sw6-98 software for the calculations; it’s very simple – just enter the relevant parameters. It can also be selected in accordance with the requirements specified in the tower specifications.
The selection can be made in accordance with the provisions of JBT4710-2005 \"Steel Tower Containers\"; of course, various parameters of the tower equipment need to be taken into consideration, and a calculation must be performed before a choice can be made
This is the scope of the civil engineering field. Submit the requirements to the civil engineering team so they can design it.
Where can I find the sw6-98 software? Could you give some more guidance?
The 98SW software is specialized software for container design, and it is basically available in all container manufacturers.
The foundation design for tower equipment is in accordance with JBT4710-2005 \"Steel Tower Vessels\", which contains specifications regarding the design of foundations and pedestals； Then use SW6 software for verification ； If the verification is successful, then it’s okay
After calculation, the selection is made in accordance with the provisions of JBT4710-2005 \"Steel Tower-Type Vessels\"
The skirt type is selected and designed in accordance with JBT4710-2005 \"Steel Tower-Type Vessels\", and then verified using the SW6-98 calculation software; the calculation is considered valid if it passes the verification
It is generally estimated based on experience, with software verification being used; calculation is rather troublesome and time-consuming
This is a task for the civil engineering team; provide them with information such as the equipment’s weight, height, diameter, the diameter of the center circle of the foot bolts, the outer diameter of the foundation ring plate, and the weight of the equipment during hydrostatic testing, so that they can carry out the design.
Hehe, for this task, architectural design software can be used; it’s in Chinese and easy to get started with. You can take a look at http://www.lankesoft.com/
For the tower foundation, if it refers to the design of the tower’s skirt section, the structural dimensions are determined in accordance with JB/T4710-2005 and HG20652-1998, SH3098-2000; the strength calculations can be performed manually or using software such as SW6. If the tower foundation refers to the civil engineering base structure, its design is carried out by the civil engineering team in accordance with the requirements of SH3030-1997; the mechanical engineering team must provide the civil engineering team with information on loads such as equipment weight, wind bending moments, seismic bending moments, and seismic vertical forces.