Why does the already configured CP342-5 still show configuration errors after the power is turned on/off?
Thread Content
Requirement: The CP currently in use is the CP 342-5 with firmware version V3.0. The configuration data is already on the CP. Reason for the error: After completely resetting the CP, new configuration information is downloaded; at this point the module recognizes that configuration and enters the \"operational\" state. But it will cause an internal error, preventing the database from being copied from RAM to ROM. If the power to the station is cut off at this time, the configuration still stored in RAM will be lost; as a result, the template cannot find the configuration data when the power is restored. This situation occurs when the module is completely reset before a new hardware configuration is downloaded. Remedy: This issue no longer occurs in CP 342-5 with firmware version V4.0.0.
I hope it’s not a copied manual.