Problems with refractory bricks
Thread Content
What are the requirements for stacking refractory bricks? Can it be piled directly on the ground? Are there any standards for the stacking of refractory bricks in the combustion furnace lining?
There are no special requirements for stacking refractory bricks. There are requirements for constructing fire-resistant walls, with different standards for various types of furnaces.
Pallets should be used for stacking, with preventing damage to the refractory bricks being the main priority. Detailed instructions should be included in the installation manual with these requirements, and the construction process must be carried out under the guidance of experts.
There are specific requirements for storing refractory bricks; they should be kept in a dry place. In addition, there must be access routes for easy transportation and installation. Bricks of the same material should be stored together, as bricks of similar materials may have identical appearances, which could lead to accidental misuse during construction and resulting consequences. It should still be stored in accordance with the relevant standards.
Many types of refractory materials require storage that is protected from rain and water. Please refer to GB/T10325-1988, GB/T 10325-1988 \"Rules for Storing, Sampling, Inspecting, Keeping, and Transporting Fire-resistant Products\"
Please refer to GB/T10325-2001 \"Rules for Stacking, Sampling, Inspection, Storage, and Transportation of Fire-resistant Products\"; the 1988 version has been replaced by the 2001 version.
Storage is mainly to protect against rain and water, as well as to prevent damage. Affects performance parameters.
Heavy bricks can generally be stacked, while light bricks are usually packaged in cardboard boxes.
Who has GB/T 10325-1988 \"Rules for the Stacking, Sampling, Inspection, Storage, and Transportation of Fire-resistant Products\"?
1. Stack in accordance with the construction sequence. (2) Stack the refractory bricks separately for different parts of the furnace； (3) Stack them separately according to the composition of the refractory bricks, as well as their specifications and dimensions ； (4) All stacks of refractory bricks shall be marked with thin tags indicating the type of brick, brick code, main dimensions, and location of use ； (6) Refractory bricks should be stacked neatly; within a stack of bricks of the same type, only one incomplete stack is allowed.
Depending on the type, refractory bricks are installed in different ways, and their cutting methods also vary! You need to specify what type of refractory brick!