Selection of gas holders and installation of gas holders
Thread Content
The company is planning to launch a gas-powered generation project and intends to install two gas tanks. I would like to ask for advice on how to choose the appropriate models for these tanks, as well as the installation procedures and approximate timeline involved. Project background: Generation of electricity using blast furnace and converter gas; two gas tanks are required, one with a capacity of 150,000 cubic meters and the other at 200,000 cubic meters
Gas cabinets are divided into dry and wet types; currently, dry gas cabinets are more commonly used for those with large capacities. Gas tanks require specialized design, and the installation methods for different types of gas tanks vary; they can be installed either in an upright or inverted position. Relevant standards are available, such as HGT20517-1992 for steel low-pressure wet gas tanks, and HGJ212-83 for construction and acceptance specifications of metal-welded wet gas tanks.
I work on gas tank projects, but I arrived too late
I have a project that generates 2,000 cubic meters of gas per hour; under normal conditions, all of this gas can be used for boiler combustion. So, what size gas tank do I need?
Is it to calculate the volume of gas based on my shutdown cycle, and then convert it to the capacity of the gas holder?
Consulting an expert: I have a project in which the boiler design must meet the following two fuel conditions: Condition 1: 50,000 Nm3/h of reformer gas per unit, and 68,000 Nm3/h of raw gas per unit. Condition 2: 98,500 Nm3/h of raw gas used alone per boiler unit. Condition 1 is the design condition, while Condition 2 is used for verification purposes. Condition 1 ensures the design parameters, while Condition 2 ensures the boiler’s evaporation capacity. There are 4 boilers in total – so what size gas tank should I use?
Safety monitoring systems and equipment for gas tank pistons (laser level gauges, monitoring of piston tilt, drift of the piston, twisting of the piston, etc.; for such safety monitoring services, please contact Nanjing Haizhihan Intelligent Technology)
Safety monitoring systems and equipment for gas tank pistons (laser level gauges, monitoring of piston tilt, drift of the piston, twisting of the piston, etc.; for such safety monitoring services, please contact Nanjing Haizhihan Intelligent Technology)
Safety monitoring systems and equipment for gas tank pistons (laser level gauges, monitoring of piston tilt, drift of the piston, twisting of the piston, etc.; for such safety monitoring services, please contact Nanjing Haizhihan Intelligent Technology)
Safety monitoring systems and equipment for gas tank pistons (laser level gauges, monitoring of piston tilt, drift of the piston, twisting of the piston, etc.; for such safety monitoring services, please contact Nanjing Haizhihan Intelligent Technology)
Safety monitoring systems and equipment for gas tank pistons (laser level gauges, monitoring of piston tilt, drift of the piston, twisting of the piston, etc.; for such safety monitoring services, please contact Nanjing Haizhihan Intelligent Technology)