INtools IO allocation issue
Thread Content
Dear teachers, I encountered a problem while using INtools. When assigning IOs, I couldn’t find the instrument I wanted to assign to in the TAG list on the left (the instrument’s IO type is correct). I was able to locate this instrument in the INDEX, and when I used the \"Generate a Control System Tag\" command, it showed that the control system profile wasn’t defined. Where should this be defined, and how can I resolve this issue? ? Thank you! !
It seems that the cables need to be assigned there in the index table
First create it in default, and then drag it to the panel?
Hehe, actually it’s a matter of technique. Are you referring to cs_tag? Please specify the INTOOLS version
Please check the properties of this table to see if the definition is complete.
The problem with LZ is that the instrument types are not adequately defined. The method for defining a CS tag is as follows: INtools main program -> index module -> tables menu -> instrument type... -> select the type you want to define -> profile -> wiring and control system -> check the three boxes mentioned above. This way, you can do it manually, and it will also be generated automatically when creating a dashboard. The initial planning for intools is very important. Hehe