[Limited-time Q&A Event Issue 2] 01 (correct +15 wealth) [ended]
Thread Content
Purpose: 1. Increase the popularity of this section. 2. Learn in a relaxed atmosphere * Professional knowledge, exchange professional English. rule: 1. Answer by replying and translate the English in brackets into Chinese. 2. It is strictly forbidden to edit the post twice after replying. Once found, the post will be deemed invalid. 3. The first correct answer +15 wealth. 4. Question scope: Handbook of commonly used practices and practices in the process and piping professions. illustrate: 1. For those who answer 5 questions correctly in total, a +50 wealth reward will be given. Topic of this issue: 01.Ma * mum operating temperature is arbitrarily set at 260°C (500°F), unless material has been (annealed, solution annealed, or hot finished), because hard temper adversely affects design stress in the creep-rupture temper range. Standard answer: Annealing, Solution Annealing or Hot Finishing Award Winner: 30dman This post was last edited by niulijun117 on 2009-4-11 11:23 ]
Annealing, solution annealing, or heat treatment
Full text translation: The maximum operating temperature is set at 260oC (500F) unless the material is annealed, solution annealed, or heat treated, as the highest hardness of cold rolled steel will in turn affect the design stress in the creep rupture temperature range.
The maximum operating temperature can be set at 260C unless the material is annealed, or heat treated) because the toughness of the steel in the toughness range has an adverse effect on the design stress.
The maximum operating temperature is repeatedly set to 260°C (500°F), except as follows: The material is annealed, the material is solution annealed, or hot worked because violent forging can adversely affect stresses in terms of cracking.
Full annealing, softening annealing and stress relief annealing
(annealed, solution annealed, or hot finished), annealed, solution annealed, hot rolled
500°F temperature annealing, solution annealing, or heat treatment
Calcined; solution annealed; hot finish rolling
Annealed, solution treated, or hot rolled
The maximum operating temperature is set at 260oC unless the material is annealed, solution annealed, or heat treated, as the highest hardness of cold rolled steel will in turn affect the design stress in the creep rupture temperature range.
Unless the material has been annealed, solution annealed, or heat treated, the maximum operating temperature must be set to 260°C (500°F) because the highest hardness in the creep rupture toughness range will have an adverse effect on the design stress.
The maximum temperature must be strictly set at 260 degrees Celsius, unless the raw material has undergone annealing, solution annealing, or heat treatment processes. The reason is that high temperatures can have side effects on design pressures within the creep rupture temperature range. :P
The maximum operating temperature is set at 260 degrees Celsius, unless the material has been annealed, liquid annealed or heat treated, because severe forging will have an adverse effect on stress. :loveliness:
annealed, solution annealed, or hot finished: Annealing, solution annealing, hot rolling or hot plating treatment
question: “rule: 1. Answer by replying and translate the English in brackets into Chinese. ” and http://bbs.hcbbs.com/thread-438978-1-1.html The answer on the third floor is a full sentence (no brackets are seen), which is very confusing.
Annealed, solution annealed or hot rolled
Annealing, solution annealing, or heat treatment The maximum operating temperature is set to 260oC unless the material is annealed, solution annealed, or heat treated, because the highest hardness of cold rolled steel will in turn affect the design stress in the creep rupture temperature range. ASTM Material Specifications (4)