Design of storage tanks with heating jackets
Thread Content
Looking for a storage tank design with a heating jacket? Have you designed such a storage tank before?
We all design it in the way of internal coil heating.
Storage tanks don’t need heating jackets, right? I only know that pipelines use heating jackets; I’ve never heard of tanks using them
If the storage tank’s jacket is insulated, then the “two valves and one device” on it also need to have jackets! “I have designed the jacket for the \"two valves and one device\" setup; storage tanks don’t have such a jacket. Essentially, it involves adding an additional layer outside the original design, with inlet and outlet ports, and steam can be passed through it or hot water can flow around it! But the cost is very high!
The storage tanks do not have heating jackets; for heating these tanks, we generally use electric heating or steam coil heating. When a high temperature is required, we use electric heating; it is possible to raise the temperature to 300 degrees in a space of 1000 cubic meters, and to 240 degrees in a space of 5000 cubic meters. We have used this method on both occasions
Either tube heating or jacket heating can be used; there are many manufacturers capable of carrying out this work nowadays