Is it best if the actual processing capacity of the tar processing equipment accounts for a large proportion of the designed processing capacity?
Thread Content
Is it best if the actual processing capacity of the tar processing equipment accounts for a large proportion of the designed processing capacity? Our factory only has 60% capacity, so we have to stop work for 10 days every month to wait for materials, which is very troublesome.
Of course, it is better to have full load and long cycle. Our 150,000-ton equipment processes 160,000-170,000 tons every year
Your situation may be caused by insufficient sources of raw materials.
The domestic design is generally larger than the actual capacity, and there is no big problem if it is increased by 30%. Of course, the tower load margin and the heating furnace margin are the decisive factors that limit the maximum processing load and the minimum load.
Generally, it is 80--110% of the design quantity. It is very important to provide sufficient raw materials.
Generally, it is 80--110% of the design quantity. It is very important to provide sufficient raw materials.
According to different drawings, the actual processing volume should be greater than the design volume. If there is no tar, let’s talk about it separately.