Points to note when constructing the carbonization chamber and combustion chamber
Thread Content
Main: The fullness of the mortar prevents air leakage between the combustion chamber and the carbonization chamber, thus avoiding explosions. The geometric dimensions xyz must remain straight; relying on markings requires the builder’s visual expertise ； Once it is set in place, it must not be struck or moved, as this will affect the saturation of the mortar. There are strict requirements for the grout; please share your opinions on the points that need attention when constructing the carbonization chamber and combustion chamber. You have an apple, I have an apple; if we exchange them, we still have one apple each ； I have one idea, you have one idea; by exchanging them, we have two.
It is mainly about the fullness of the mortar; the thickness of the mortar should be 5 MM to prevent leakage； The flatness of the first layer of bricks in the carbonization chamber must be carefully checked ； The width of the expansion joint must be sufficient ； The mortar used for the lamp holder bricks must be sufficient ； The verticality of the combustion chamber must be strictly controlled, as well as the quality of the bricks. Shoulder distance and its flatness, verticality
It mainly depends on the fullness of the mortar; the thickness of the mortar should be between 3-6 MM, and the wall surface must be smooth to ensure proper geometric dimensions.
Top bricks are particularly important; it is essential to ensure that there are no cracks in them, neither horizontally nor otherwise! ! ! ! ! !
It seems you’ve covered all the main points to consider, haha. Next, strict requirements will be imposed on the refractory materials you use; there shouldn’t be anything else left