Metallurgical Safety: Fire Prevention Management System for Key Areas in the Metallurgical Industry

Thread Content

　1. It is prohibited to set up temporary welding or cutting work areas under high-voltage overhead lines, and buildings or flammable materials must not be piled up there. 　　 　　2. Various warning signs, operating procedure signs, and no-fire signs are displayed clearly and in sufficient numbers. 　　3. The welding and cutting work area must be at a distance of at least 10 meters from hazardous items such as oxygen cylinders, calcium carbide drums, and acetylene generators, and at a distance of at least 30 meters from flammable and explosive materials. 　　4. The storage distance between the acetylene generator and the oxygen cylinder must be at least 2 meters; when in use, both must be kept at least 5 meters away from open flames. The safety accessories on welding and cutting equipment such as oxygen cylinders and acetylene generators must be complete and functional; otherwise, their use is strictly prohibited. 　　5. Welding and cutting operations at the construction site must comply with fire safety requirements; two fire extinguishers with a rating of at least 4B should be provided for every 30 square meters, and the “Ten Prohibitions on Burning” rules must be strictly followed. 　　6. An approval process must be followed before carrying out hot work, and sign-off procedures for information disclosure must be completed. 　　7. Strictly enforce the reward and punishment system: those who abide by fire safety regulations, do not cause any fires of any severity, are able to eliminate potential fire hazards or bravely extinguish fires shall be commended and rewarded. Those who violate these regulations and cause fires will be punished according to the severity of their actions; in cases where serious consequences occur, criminal liability will be pursued in accordance with the law.