Selection of temperature and pressure reducers
Thread Content
Please share whether your companies use domestic or imported temperature reduction and pressure reduction devices. Our company’s process requirements involve converting high pressure to medium pressure; if imported devices are used, which brand would you choose?
The high-temperature temperature reduction pressure regulator can be designed and purchased domestically; imported valves can be used for the valves themselves, but it’s not necessary to import everything, as that would be very expensive. For further discussion, please visit nm-gyf@vip.sina.com.
1 For the temperature-reducing pressure regulator, it is sufficient as long as it can ensure uniform mixing of gas and liquid, proper control of flow rate, a reasonable vibration-resistant design, and appropriate material selection. Domestic products are completely viable. As the friend on the second floor said, selling imported products often means selling a brand name; there is no fundamental difference in essence.
In my opinion, there is no comparison in terms of reliability between domestic and foreign products. It’s not that domestic products are unusable; rather, they are unreliable. If they work well, then they’re better than foreign products, but if they don’t work well, then things get worse. I am very skeptical about China’s manufacturing precision and techniques! If conditions permit and reliability is required, it’s still better to import!