The issue of pressurized aeration of brine
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 at 19:49. During the production of brine, pressure dissolution is employed; what is generally the flow rate of the brine in the dissolving ejector? # ， ， &
It depends on how many pressure-dissolved air tanks your company uses, and how many nozzles each tank has. The flow rate is calculated by dividing the hourly saltwater flow rate by (number of dissolved air tanks * number of nozzles)
The nozzle is very small; we have a capacity of 100,000 tons, with three mixers. The pressure is controlled at 3 Kgf/cm2. Last edited by yzhms on 2009-4-14 16:48.]
The flow velocity at the nozzle outlet is approximately 6 m/s
How many nozzles do you have! What’s the traffic volume! But it doesn’t seem to have much meaning. We usually monitor the flow rate of each flow meter. This post was last edited by limingshuguang on 2009-4-16 11:59.]