What are the conditions at the downstream boundary for the 6.5MPa Texaco process?
Thread Content
This post was last edited by Tianya Langji on 2009-5-6 at 18:04. Could everyone discuss the conditions of the syngas in various sections of a methanol plant that uses the 6.5 MPa Texaco process? For example, the temperature, pressure, and gas-to-liquid ratio of the syngas at the exit of the quench chamber; the temperature, pressure, and gas-to-liquid ratio of the syngas at the exit of the carbon scrubber tower; the temperature, pressure, and gas-to-liquid ratio of the syngas at the exit of the shift unit; the temperature, pressure, and gas-to-liquid ratio of the syngas at the exit of the low-temperature methanol scrubber; and the temperature, pressure, and gas-to-liquid ratio of the syngas at the inlet of the methanol synthesis tower
This issue has very practical significance