Calculate the material and energy balances for Texaco gas generation
Thread Content
I need the material and energy balance calculations for Texaco gas generation, with an annual production capacity of 50,000 tons using the co-ethanol process. It’s urgent; thank you in advance
Under different operating conditions, the material and energy balances also vary; the plant must have certain conditions, such as the type of coal, temperature, pressure, oxygen-to-coal ratio, and so on.
On the second floor as well, due to different operating conditions, process parameters, and procedures, the calculated material energy balances vary
Could you provide a more detailed explanation?
Shaanxi Shenfu coal, Texaco gasification: temperature 1400, pressure 4 MPa; 675 cubic meters of oxygen per ton of coal. Desulfurization is carried out using the resin method, complete low-temperature conversion is employed, and NHD is used for carbon removal. The parameters such as pressure and temperature for these processes can be arbitrary; what I mainly need is the calculation process
You can look for a book on material balance and heat balance. For my work on ammonia synthesis, I use the \"Handbook of Process Design and Technology for Small Nitrogen Fertilizer Plants\"; it contains step-by-step instructions and the necessary data is easily accessible. You can use the format in that book based on your own process conditions. Of course, doing the calculations manually is quite tedious. Good luck to you!
Where can I buy the Process Design and Technical Manual for Small Nitrogen Fertilizer Production?
Most chemical industry bookstores have relevant books; the titles may not be exactly the same. Search online for nitrogen fertilizer process design manuals; there are many sellers.
You can download it online and use it right away; why buy it?
I would like to ask where in China one can conduct erosion tests on materials for water-coal slurry nozzles? Thank you