How can water hammer in the steam condensate return pipeline be solved?
Thread Content
The steam condensate cannot return to the condensate return tank, which leads to water hammer effects; currently, low-point discharge is used to address this issue, resulting in water waste.
If it is condensate water, it is recommended to first check all the hydrophobic systems, focusing on whether the selected or operating hydrophobic valves are functioning properly. Replace unreasonable or substandard steam traps to ensure that steam does not enter the condensation system. Additionally, reduce unnecessary bends in the condensation pipes, install additional support brackets; at bends and at points of high and low levels, provide vents or drain lines. If necessary, take appropriate measures to prevent secondary vaporization caused by excessively high temperatures in the condensation system, as well as the entry of steam.
Check the steam trap; it is also advisable to install a gas-liquid separator before the liquid returns to the pipeline