Energy consumption of atmospheric and vacuum distillation units
Thread Content
May I ask how much energy is required to process 1 ton of crude oil in a atmospheric and vacuum distillation unit? Thank you all! ! ! ! ! ! :) :)
Sinopec’s average level is estimated to be around 400 MJ or more
Based on the existing conditions of your own equipment, is it a standalone unit or a combined unit? It mainly depends on the configuration and cost of the utility systems.
I think the energy consumption of our usual pressure application device is around 11 kilograms of standard oil per ton
Based on the configuration of the unit, it is generally 9–10 kg of standard oil per ton of crude oil. If there is a light hydrocarbon recovery unit, it will add 1 to 2 units. This post was last edited by lyybjgz on 2009-4-21 08:18]
Our energy consumption is 9.8~10 kgEO/t
The energy consumption of atmospheric-pressure units is primarily due to fuel gas and fuel oil; the proportion of water, electricity, steam, and air is much smaller. Therefore, what matters most is the efficiency of the atmospheric-pressure heating furnace. At the current level, it is generally around 9 kgEO per ton.